Default Configuration

From Entuura

Jump to: navigation, search

The default configuration for an Entuura image is: 

IP: 172.16.16.1
Syslog to: LAN + 1 (i.e. 172.16.16.2)
Wireless: disabled
Username: root
Password: the normal one for our project
SSH Key: it will accept the Maintenance Key
User interface: port 80
Admin interface: port 81
WAN: DHCPs for an address
Firewall: Allows port 22 and port 81 inbound from the WAN

If, while the box is booting, it DHCP's a 172.16.16.x address for the WAN, then it will change the LAN address to 172.16.17.1 and reboot. It does this generally, not just for those two examples. It would auto-increment on any boot when it discovers it is behind the network it was hoping to use for it's LAN interface.

As long as your laptop is plugged into the LAN of the device, you can always access the device's web UI from [http://entuura/]. (How this works...)

Retrieved from "http://wiki.entuura.org/site/index.php?title=Default_Configuration"
Community